Products

Ecosol II Autumn Suede System

Ecosol II Autumn Suede is a two pot high-density effect with suede finishing look brittle print (or cracking) ink. Ecosol II Autumn Suede is PVC, Phthalate and Formaldehyde free, environmental system for achieving high density, suede finishing look of brittle or crispy cracking effect similar to the brittleness of the with thick form of autumn dried leaves brittleness.

Autumn Suede Series are sold in 2 parts. Part A (Autumn Suede Catalyst) which is an additive and is used at the ratio of 1:1 or 2:3 with Part B (Autumn Suede Base or Autumn Suede White).

Normally Autumn Suede White was used for products that required whiteness or opacity.

Cotton, Blends Cotton Polyester and some Syntactic Fabrics.

39 to 59 metric mesh counts with high solid contain emulsion for thick screen at approximately 200 micron thickness are recommended. (Refer to your stencil suppliers)

Soft squeegees at 55/65 sore hardness are recommended.

For maximum fastness, prints are to be cure at a minimum of 160oC, optimum airflow recommended is 55 cubic meter/ minutes of IR hot air for 120 seconds for ink deposit of 200 micron. Longer curing time are recommended for higher ink thickness.

Keep ink in an indoor condition away from direct sunlight. Once bases and catalyst are added, ink can only be store for 30 days (check mixed ink condition prior using)

Go Back
TOP