Products

Ecosol II System

Ecosol II is an eco-solution ink that are PVC, Phthalate and Formaldehyde free, “plastisol simulated” 100 percent solid acrylic ink system. It is a ready for use with high elastomeric non air-dry ink that can be screen direct out of its can.

Ecosol II System is an excellent product for use for printing depth dark shade on dark color fabrics where excellent elastomeric and hand feel is required. Print with Ecosol II will show good elastomeric properties, high washing fastness properties and high color brilliancy. The crocking (wet and dry) fastness for printed Ecosol system show excellent result.

Cotton, Blends Cotton Polyester, and some Nylon.

Printers are advice to use only direct in direct emulsion. Capillary film are recommended for high density printing (Call your emulsion supplier for water resist emulsion).

Mesh Type

  • 32T monofilament for Puff, Metallic, Glitter, and Shimmer.
  • 49-77T monofilament for solid graphic design.
  • 77-90T monofilament for underbase and details.
  • 120T monofilament for detail print or for out line and process printing.

For maximum fastness, prints are to be cure at 160°C or 320°F. Airflow recommended is 2000 cfm for 120 seconds at ink film thickness below 35 micron.

For excellent opacity on printing under base white, 65 sore hardness squeegees are recommended. Soft tables are most suitable for opacity or high-density effect. We will suggest that a silicon rubber, to be place on top of the printing pellet to improve the printing table hardness. Squeegee hardness of 65/75 sore was recommended for wet on wet multi color printing. Squeegee hardness of 75/85 was recommended for detail and fine toning effect.

Go Back
TOP