Ecosol E1 Cracking

Ecosol E1 Cracking is a new innovation on cracking print effect of our generic of non PVC, non-Phthalate and Formaldehyde free high solid content, hybrid of waterbase thermoplastic acrylic with silicones which meets our E1 compliance. Ecosol E1 Cracking White is a high opaque white and Ecosol E1 Cracking Clear is translucent in color. These are ready for use water base Ecosol E1 Cracking ink that can be screen printed immediate out of its can. Ecosol E1 Cracking White is an excellent product for use on dark fabrics where maximum opacity with cracking finish is required, where else Ecosol E1 Cracking Clear can be used in conjunction with a wide range of waterbase pigment concentrated to achieve desire colors of crack print. In general, washing properties for Ecosol E1 Cracking Series are good.

Cotton and Blends are recommended.

Used only water resistant, direct in direct emulsion

  • 43S/110S ~49S/120S mono-filament at 30 Newton.
  • 39T/100T~51T/130T mono-filament at 30 Newton with emulsion thickness of 200μm.

For maximum opacity 50/60 durometer hardness squeegees are recommended for underbase. To achieve an excellent cracking effect, use 45/55 durometer hardness squeegees.

All underbase should be touch dry prior laying down the Ecosol E1 Cracking paste. Final drying and cracking are suggested at 150°C/302°F for 90 seconds with Airflow recommended are 2000 cfm/50cmm for proper polymerization.

Ecosol E1 Suede System is completely green which meets the E1 standard of safety requirements, it is nonvolatile (waterbase) and was made from material that is non-carcinogenic and non-hazardous to the environment.